Wargamers have had a difficult relationship with skirmishers. In the early days they were always there. After all they were a constant feature of historical battle accounts, and many commentators suggested skirmishing was an important part of war in this era. Besides the light troops provided interesting variety in their uniforms. Advancing bodies of miniatures would always have a scattering of skirmish figures before them, usually mounted on single bases. Rules were designed to accommodate them, albeit very crudely, usually without any provision for reserves and so on.
But at some point gamers got fed up with them. They seemed to require an awful lot of work for not a lot of effect. They started to disappear, with gamers rationalising that the effects of skirmishers were taken care of in other game processes. Or else there would some kind of tokenistic “skirmish phase” which could be quickly got through as a preliminary to the main combat. The deeper truth is that most historians, and wargamers in their wake, never really understood what skirmishing was all about. I want to try and unpack this a bit.
Now let’s start with the traditional view. Skirmishers would be drawn from an elite company, the British Light Company (often topped up with riflemen) or the French Voltigeurs. (The reluctance of British historians to properly understand Austrian and Prussian practices, with no elite companies, is one of the many dimensions of this issue). These men would run out in advance of an attack and deliver fire on the target, which would help shake it as the attack was actually delivered. The main body would advance without stopping, with the skirmish screen melting away as it approached.
At first this looks like quite a plausible tactic. A typical battalion frontage would be about 200 paces. Across this frontage 20 or more pairs of skirmishers would be deployed – say 50 men. That would be about half a voltigeur company, the other half being held back as supports. This screen would advance about 200 paces, say, in front of the main body (though in wargames it would typically be less). That gives them two minutes to soften up the target. Fresh troops in an elite company could be expected to loose off six aimed rounds in that time – 300 rounds altogether. There is a suggestion (see Nafziger’s Imperial Bayonets) that nearly half of these rounds would score – say 120. Well in real battlefield conditions we know this is unlikely. But say on average each of the men in the screen found his mark at least once – 50 men killed or hurt. The target might be 700 men strong, so you could easily get 5-10% casualties. Surely enough to rattle a unit? The picture of the opposite – defensive skirmishers harassing advancing troops is more complicated, as the skirmishers would have to both move and fire. But perhaps they could make up for this by using the support line as the attackers advanced.
This is highly idealised, of course – but then these things look so simple for people moving tin men on a tabletop – without the minor terrain features that can hide whole units, or smoke, or noise that interferes with command. But there a much bigger and more obvious problem. What happens if both sides have a skirmish screen? Wargamers seem to resolve this by deciding that one or other of the screens rapidly gives ground, leading the winning screen free to do its stuff. But how? Well something like a bayonet charge would be needed to get that sort of result quickly enough. And here the historical evidence vanishes. This happened only rarely, if at all. It wasn’t that light troops were deficient with the bayonet – they often led the way in broken ground or villages, where most bayonet fighting took place. I think there is something about the dispersed nature of a skirmish screen that makes this impossible. One issue might be that the psychology of dispersed formations makes it much harder for men with loaded muskets to go forward to contact. Or it could simply be command and control – a charging skirmish screen could not be rallied in time to do any meaningful skirmishing afterwards.
No. What happened when two skirmish screens met is that they stopped and took potshots at each other. Given the dispersed nature of the target, which could make use of any ground cover going, and the fact that the firers were themselves under fire, this fire would be pretty ineffective and would not achieve very much in the two minutes it took for the advancing formed troops to catch up. At this point the attacking side has a decision to take. He can press on through his own screen, drive back the enemies’ and then onto the main body. The attacking skirmishers would have achieved nothing, and the defending skirmishers probably not much more. I think the French attacks at Vimiero and Victor’s at Talavera were much like this – as were the British attacks at Salamanca. And if this is the typical pattern of events, then the wargamers’ loss of patience with skirmishing becomes understandable. They just cancel each other out.
But the attacker has another choice. He can halt the advance and give his skirmish screen a chance to take effect. If his skirmishers are superior, he will cause the opposing screen to wilt, and he can advance his own men up to the main body. The attacker can try to make sure of this by feeding extra men into the screen. The skirmish supports go first, and then men from the main body can be sent in. But the same options are available to the defender. We might then get an escalating skirmish combat, which starts to become the main event, rather than the clash of formed troops. Of course the more men you sent into the skirmish, the weaker the formed body would become. It was one of the more difficult tactical decisions that field officers would have to make.
Here are a couple of examples – sticking to British/French encounters, as these familiar and well documented. Ney’s attack at Bussaco, got into just such an escalating exchange with the British Light Division. But the better-trained British proved to have the better of this. In desperation the main body charged in, only to be ambushed by the reserve troops from the Light Division. Reynier’s attack at Bussaco also developed into a big skirmish exchange. In the end the British charged and drove the weakened French off – but I haven’t studied this episode in detail – the French may have tried a bayonet charge first. A further example is Quatre Bras. The French seem to have made no serious attempt to charge home with their infantry, being content to wear down the Allies with skirmishers and artillery, and then test their mettle with cavalry attacks. The British skirmishers could not compete with the numbers of French skirmishers thrown at them, and so the formed bodies took the strain, though helped by some cover. They tried counterattacking with some success, but Allied casualties were high.
There is good reason to think that these prolonged encounters between skirmish lines, fed by supports, were quite normal. If you read the generic accounts of warfare from Prussian author Clausewitz (who served Prussians and Russians in the wars, right up to the Waterloo campaign) you would think it was the norm. Such combats marked what he called the “destructive” stage of a battle, before the “decisive” stage was arrived at.
Something important needs to be added to this. I have painted a picture above of six shots being loosed off in two minutes, and causing quite a bit of damage. But after those first few shots a number of things would conspire to reduce the effect of fire. The firers would tire, their weapons start to clog and become hot and harder to handle, shoulders would become bruised, making men reluctant to hold their weapons properly. And volumes of smoke would appear. Often shots would be fired at an unseen enemy without any true aim. Less experienced troops were notorious for loosing off as many shots as possible as quickly as possible, the quicker to be taken out of the firing line due to ammunition depletion. The expenditure of musket ammunition was many times higher than the casualties they inflicted in this era (a notable contrast with artillery stats for the period, incidentally). Things slow down drastically. Instead of matters being resolved in minutes, as would be the case with close range volleys and bayonet charges, time slips by very quickly. An exchange could use up a couple of hours quite easily.
A further point needs to be made, which takes a little grasping, but which is critical to simulation. Of lot, even most, of the destructive effect of skirmish warfare arises from fatigue and ammunition loss, not from the casualties inflicted. Troops would burn out, a process graphically described by Clausewitz’s references of men becoming “extinguished volcanoes”. The damage was, in a sense, self-inflicted. Superior discipline counted for a lot, because good troops would tire out less quickly. The slower rate of fire of rifles might actually be a benefit. If that sounds bizarre, consider this. Why, in the 1860s, were so many armies reluctant to introduce faster-firing breech-loading small arms? The grizzled, veteran generals were worried that their troops would simply burn off the ammunition too quickly and then become useless – they had reckoned without the superior accuracy of rifled weapons, and, perhaps, the better discipline of armies raised in peacetime. A consequence of this is that skirmish combats almost always caused significant wear and tear to both sides. The number of times I have seen a tabletop encounter were the better side gets off Scott-free is legion! The idea wasn’t so much to kill your opponents as to force them to throw more men into the combat, making them useless in the “decisive” phase.
A more subtle point flows from this. Differences in training and morale would cause different rates of attrition between the sides – but otherwise the main variables tended to affect both sides equally. These might be the length of time of the exchange, the amount of smoke and ground cover (though one side might have an advantage here), and the aggressiveness with which each side pursued the combat (which would stimulate a response in their opponents). This runs counter to the way most skirmish combat mechanisms work: typically each side throws a dice to judge losses (usually on the other side) and these are only weakly correlated.
The problem for tactical wargames rules becomes obvious – I’m thinking of systems like Lasalle (which I have played) and Black Powder (which I haven’t even read). Typically a move represents quite a short space of time. You don’t want your game to degenerate into many moves were little happens – even if this quite a legitimate, battle-winning tactic in real warfare. They have similar problems with representing artillery, which real soldiers often used in prolonged bombardments that no wargamer would have the patience for. Skirmishing is dealt with very formulaicly in Lasalle, so as to be resolved quickly without disrupting play too much. But I don’t think the challenge insuperable, what is needed is an elastic approach to representing time. I have a few ideas on this, but not tested them yet. My current energies are going into grand tactical rules.
In grand tactical games a move usually averages out to 30 minutes, with 20 minutes or an hour used as well. And elasticity (some moves represent longer elapsed time periods than others) is pretty much a given. The challenges are different at this level. The “So what?” issue is an important one. Combat mechanisms avoid the detail, so who cares if what is going on is a conventional clash of formed troops, or a skirmish exchange? Because there are different risk calculations to be made. A volley and bayonet approach, with only a limited role for skirmishers, will yield quick results, but those quick results can often be bad ones. It did not go well for Junot at Vimiero or Victor at Talavera after all. Or Leith at Salamanca. A skirmish-led approach is classic attrition warfare, on the other hand, and neither leads to quick victory nor quick defeat. In modern language, it has a low standard deviation. If you have a numerical advantage it is one way of making it tell. Your opponent may be forced to throw the dice and counter with cold steel – usually with the odds stacked against them.
I am not sure if I have ever seen this trade-off represented properly in grand tactical rules. In Grande Armée skirmishing is represented by throwing one or two dice, and hoping for a six. It is a high standard deviation approach, and pretty ineffective at that. I haven’t played Volley & Bayonet but I think it suffers from a similar problem. Slow rates of casualties in a typical game mechanism, is represented by having to score high on a dice, which means that losses are very uneven – and completely unlike the way attritional tactics worked in life.
The skirmish rules in Et Sans Résultat are much, much better. Both sides decide commitment (three levels – aggressively pressed, passively respond, reluctantly participate); dice are thrown to see if one side “wins”; each side then throws to see how many hits are suffered. There is a clear appreciation that losses (i.e. hits) flow from the numbers fed into the encounter, rather than actual casualties, and that depends on control as much as anything. But there are issues. Skirmishing comes over as an element of friction rather than a tactic. In the one game I played I tried to use it as a tactic but the rewards were poor. If you “aggressively press” you are quite likely to end up with damage (fair enough) but your odds on inflicting it are limited. Quite often one side would suffer nothing at all. It’s quite high standard deviation stuff. There are a couple of other issues. It seems inconsistent with the game design that players are given three options as to how to conduct skirmishing, when so many other things (for example the line/square/column decision) aren’t given to players. The level of commitment should sure follow from tactical doctrine and divisional orders, with the dice taking care of local variation? Also a round of skirmishing precedes most combats, including straight bayonet charges. In my view (see above) serious skirmishing only happens when the main bodies are halted, and there is enough time for the firing to take is toll. I suspect these issues are interrelated. As skirmishing is not really a useful tactic, why would you delay an attack to skirmish? In which case you wouldn’t get much skirmishing at all.
Skirmishing is not an easy thing to do justice to at any level of rules design. It is not a problem that I have solved in my dabblings with rules design. But cracking it is surely necessary to get the true flavour of Napoleonic warfare.